Lying flat inside a filtered booth, doors receive thin passes with a sand between coats, while face frames and boxes are coated in place behind sealed plastic. Sprayed cabinet painting leaves no brush ridge and no roller stipple anywhere.
Spraying is also the reason a kitchen in a Yonge Street condominium or a house in Jefferson stays livable through the job. Everything that can come off the wall does, and it comes back with a factory-grade surface on it.
Brush Marks From Hand Cabinet Painting Never Disappear
A brushed rail on a shaker door holds ridges that catch the light from every angle. Rolling substitutes stipple for ridges. Neither surface levels out under a second coat, both trap kitchen grime in the texture, and both are how a painted kitchen ends up looking painted.
Sprayed cabinet painting atomizes the coating into a fine mist that lands as one continuous film. Because the film is thin it flashes off evenly instead of sagging, and because every coat is sanded ahead of the one after it, the final coat sits on an even foundation. The difference between brushed and sprayed cabinet painting is visible across a room.
Cabinet Painting Happens In Two Places At Once
Two environments are needed, because doors and boxes are different problems. A door can lie flat, which is what allows a level coat with no runs at the panel, and a booth gives filtered air, steady temperature and dust-free drying. That is where doors and drawer fronts travel.
Boxes and face frames stay bolted to the wall, so cabinet painting on them happens in place. The kitchen gets wrapped in poly, the openings get masked, an extraction fan runs, and the frames are sprayed on the same schedule as the doors. The two halves are timed so colour and sheen match exactly when the doors come back.
Two Cabinet Painting Coating Families Behave Differently
Two coating families dominate cabinet spray painting in Ontario. Waterborne alkyd enamel levels beautifully, tints to thousands of colours, is low in VOC, and reaches normal use in about a week with full hardness near thirty days. It is forgiving and it suits most kitchens.
Two-component polyurethane blends a hardener in and cures chemically rather than by drying. Pot life is a few hours, the film is sandable within about two hours, and it is effectively cured in a day. It resists cleaners and wear better than anything single-component, which matters on a family kitchen or a rental. It is spray-only, so it exists because of the booth. The quote names which system a kitchen gets, and the kitchen cabinet painting page explains where each one fits.
Sprayed Cabinet Painting Costs More Than Brushing, And Here Is Why
Labour and equipment, not paint, account for the difference. Spraying adds masking, containment, booth time, racking, sanding between every coat and transport of the doors, which is roughly twenty to thirty percent more labour than brushing the same kitchen. What it buys is a harder, smoother finish.
Ask For A Sprayed Cabinet Painting Quote
Call +1 (289) 201-7168 or send a photo with a door count, and a free visit is arranged across Richmond Hill, Elgin Mills, Headford, Gormley and up into Whitchurch-Stouffville. Your written cabinet painting quote states the coating system, the sheen and the coat count, so nothing is left to interpretation. All nine services sit together on the home page.
Cabinet Spray Painting Questions
Why do the doors leave the house to be sprayed?
A door lying flat takes a level coat with no runs at the panel, and a booth gives filtered air, steady temperature and dust-free drying. Spraying in the kitchen would send overspray and smell through the house. Only boxes and face frames are coated in place, behind sealed poly.
What is the difference between waterborne alkyd and 2K polyurethane?
Waterborne alkyd enamel levels well, tints to thousands of colours and reaches full hardness near thirty days. A 2K polyurethane cures chemically, sands within about two hours and is close to fully cured in a day. It resists cleaners better. The quote names which system your kitchen gets.
Does spraying cost more than brushing?
Yes, by roughly twenty to thirty percent in labour. The extra goes to masking, containment, booth time, racking, sanding between every coat and moving the doors. It buys a smooth film with no ridges or stipple to hold dirt. The paint itself is a small share of the difference.